Seismic Vulnerability Assessment

Field Survey Guide—Part 2

School

ID Number

Column dimensions                              
    1T 1L 2T 2L 3T 3L 4T 4L 5T 5L 6T 6L 7T 7L
A 3rd storey                            
  2nd storey                            
  1st storey                            
B 3rd storey                            
  2nd storey                            
  1st storey                            
C 3rd storey                            
  2nd storey                            
  1st storey                            
D 3rd storey                            
  2nd storey                            
  1st storey                            
                               
Wall dimensions - Longitudinal
    1-2 1-2 2-3 2-3 3-4 3-4 4-5 4-5 5-6 5-6 6-7 6-7 7-8 7-8
    length thickness length thickness length thickness length thickness length thickness length thickness length thickness
A 3rd storey                            
  2nd storey                            
  1st storey                            
B 3rd storey                            
  2nd storey                            
  1st storey                            
C 3rd storey                            
  2nd storey                            
  1st storey                            
D 3rd storey                            
  2nd storey                            
  1st storey                            
Wall dimensions - Transverse
    1 1 2 2 3 3 4 4 5 5 6 6 7 7
    length thickness length thickness length thickness length thickness length thickness length thickness length thickness
A-B 3rd storey                            
  2nd storey                            
  1st storey                            
B-C 3rd storey                            
  2nd storey                            
  1st storey                            
C-D 3rd storey                            
  2nd storey                            
  1st storey                            
D-E 3rd storey                            
  2nd storey                            
  1st storey                            

Sketch

Line sketches should be provided at each floor level indicating:

Steel columns should be noted on the sketches and their overall dimensions stated in the table. In general, the walls should be shown only when they are continuous from floor to floor.